This tutorial is about Volume Guaranteed Pressure Controlled (VG-PC) Ventilation – otherwise known as PC-VG, PRVC, VC+ etc. It is a modern mode of ventilation that aims to deliver a desired tidal volume (volume control) using the pressure controlled paradigm (unlimited flow). As such it is a mode that is often labelled “dual controlled” although, in some ways, it is neither volume controlled, pressure controlled nor both.
Confused? Most are. I have labelled the mode VG-PC – because that is the best approximation – but volume is not necessarily guaranteed and it is certainly not limited. So why bother using this mode. Simply – it works! As a general use “unit default” mode of ventilation VG-PC has few peers: it is nimble enough to be used as the mode of ventilation of choice for patients admitted to ICU following intubation: postoperatively or with respiratory failure.
If the lungs deteriorate – then the mode is versatile enough to deal with it. Being time cycled – mean airway pressure can be easily altered. If compliance or resistance of position changes – then the tidal volume “guarantee” changes the inspiratory pressure from breath to breath to ensure that things remain stable. If the patient breaths spontaneously, using the assist control or SIMV paradigm, flow is increased to meet patient demands. As such it is a very forgiving mode of ventilation, ideal for novices, reassuring to the ICU clinicians. This tutorial explains VG-PC, demonstrates how it is set up in three different ventilators – Puritan Bennetts, Dragers Evitas, Servo I and GE (Aisys) anesthetic machines. I explain the operation of this mode and its strengths and weaknesses. I guarantee you’ll learn something. @ccmtutorials http://www.ccmtutorials.com
Tag Archives: Volume Control
Pressure Controlled Ventilation – Fundamentals Part 2: Mean Airway Pressure
In the previous tutorial I introduced some of the fundamental elements of pressure control ventilation – time cycling, decelerating flow, pressure ramps etc. This time I discuss, in detail, the concept of mean airway pressure (Pmaw) and describe why increasing Pmaw is an effective way of treating patients with extensive lung disease. In volume controlled ventilation this can be achieved by titrating PEEP upwards and increasing respiratory rate. Care must be taken to keep the plateau pressure below 30cmH2O in the majority of patients. In pressure control Pmaw is generally increased by increasing inspiratory time – extreme care must be taken, though, to avoid escalating Auto-PEEP as this corrodes tidal volume and actually reduces Pmaw.
If auto-PEEP is unavoidable, as it is with inverse ratio ventilation, then extrinsic PEEP should be reduced to ensure that tidal ventilation is maintained. Pmaw can be achieved in volume control by adding an inspiratory pause, and in pressure control by increasing respiratory rate – but these are less effective approaches – in volume control because of necessary flow limitation and in pressure control because of fixed inspiratory times, and Auto-PEEP.
I guarantee you’ll learn something.
@ccmtutorials
Tutorial 5 Now Available: Volume Control Ventilation – featuring Volume Assist Control
I am now moving on to the “meat” of the mechanical ventilation course, starting with volume controlled ventilation. The first of these tutorials is on volume assist control. Even if you think you know a lot about this mode – stick with me, there is a lot of information packed in and I guarantee that you will learn something. Comments always welcome.
Mechanical Ventilation – Control
As promised – here is the first tutorial from Module 1 (“Setting Up a Mechanical Ventilator”) of the course on Mechanical Ventilation. I discuss the difference between Volume Control and Pressure Control and Dual Control – including the advantages and disadvantages associated with each mode.
New Tutorial Every Wednesday,