Tag Archives: pressure support

Breathe Easy – Automatic Tube Compensation

Posted on by
Reply

This tutorial is about Automatic Tube Compensation (ATC). ATC is a setting that has been included in most modern ventilators. Its aim is to reduce the work of breathing associated with the drop in pressure across the endotracheal tube. The ventilator senses pressure, flow and resistance and changes the pressure during the breath to ensure that the patient has the sensation that they are breathing through their own airway. There are two configurations of ATC – one is as an alternative to pressure support in patients who are essentially weaned from mechanical ventilation: essentially a spontaneous breathing trial. The second configuration is as an accessory to all pressure limited modes – such that the pressure waveform is crafted in inspiration and expiration to reduce the workload of breathing during both phases of respiration. @ccmtutorials http://www.ccmtutorials.org

SIMV-Pressure Control

Posted on by
Reply

This weeks tutorial is on SIMV-Pressure Control. Although this is one of the lesser used modes of ventilation, I sometimes see my colleagues using it in the operating room. And for good reason. Anesthesia ventilators are not set up in the same way as ICU vents. In particular – if you choose “PC” Pressure Control – that is what you get – pressure control; NOT pressure assist control. Hence there is no real provision for patient ventilator interaction. If you choose “SIMV” as pressure control, volume control or volume guaranteed pressure control, then the patient can breath and interact with the ventilator and receive pressure supported breaths. Consequently, conventional SIMV modes, these days, are far more likely to be used in the operating room than in the ICU.

The second reason that I wanted to cover SIMV Pressure Control is to set the groundwork for a different mode “BiLevel Pressure Control” that is built on a similar platform, looks a bit like SIMV, and has significant benefits for those of you who might choose SIMV-PC in ICU.

Most modes of ventilation offer two ways of supporting the spontaneous breath – assist control and SIMV. In SIMV-PC the spontaneous breath can be unsupported, pressure supported or partially supported using Automatic Tube Compensation (ATC). This tutorial covers the type of patient to whom you might deliver SIMV-PC; how to set up the mode; what it looks like on a ventilator screen and the strengths and weaknesses of the mode. @ccmtutorials http://www.ccmtutorials.org

Inspiratory Rise Time

Posted on by
Reply

When a pressure limited breath is triggered there is a slight delay between that point and the airway pressure target being reached. This is controlled by a setting on the ventilator known as the “inspiratory ramp” or “inspiratory rise time.”

Although I am covering this topic under the banner of “Pressure Support,” all pressure limited modes include this function, although it may be hidden from sight and each ventilator has a different system for adjustment. Most of the time you will get away with not having to adjust the rise time beyond the factory setting. Nevertheless – having an understanding of the inspiratory ramp is useful for fine tuning breaths in patients who have a tendency to be dys-synchronous. I guarantee you will learn something.

Japan April 5th 2023.

Pressure Support Ventilation – Part 1

Posted on by
Reply

If you go into most ICUs today, the most commonly used mode of ventilation is Pressure Support. There are many reasons for this: it is widely believed that supporting spontaneous breathing results in less muscular – and in particular diaphragmatic – atrophy; patients require minimum sedation and can be gradually weaned and, because it is a pressure targeted mode, there is biologically variable ventilation. Although not every ICU uses Pressure Support as part of its invasive ventilation strategy, virtually all units use it for non invasive ventilation. If you work in ICU you MUST understand Pressure Support. In my view it is the MOST important mode of ventilation. It is also the easiest mode to get started with and one of the most difficult to master.

These are four tutorials on Pressure Support Ventilation – starting with Triggering, then Breath Initiation, then Setting the Level and, finally, Expiration. The first tutorial introduces the concept of Assisted Spontaneous Breathing and Pressure Support and revisits Triggering – Flow and Pressure Triggering. Although I covered this in the introductory tutorials, I go into much greater detail here. In particular I cover Undertriggering and Overtriggering. I guarantee you will learn something.