Tag Archives: peep

Pressure Assist Control in ARDS (Acute Hypoxic Respiratory Failure)

Posted on by
Reply

This is the second tutorial on Pressure Assist Control (PAC).

The tutorial focuses on the use of PAC in acute hypoxic respiratory failure (AHRF or ARDS). In this tutorial I cover the use of Pressure Assist Control in Acute Hypoxic Respiratory Failure (AHRF or ARDS). My major objective is to ensure that you understand that cookbook approaches to ARDS using volume control cannot be ported over to pressure control – in particular the ever increasing use of PEEP.

During previous tutorials I explained that increasing mean airway pressure (Pmean) can be achieved more effectively with increased inspiratory time (Ti) than by increasing PEEP. Pmean can also be increased by increasing respiratory rate but you must be really careful with Auto-PEEP as that reduces tidal ventilation, Pmean and increases dead space. This tutorial starts with an explanation of the Pendulluft effect in hypoxemia and with increased airway resistance – basically prolonging inspiration results in better overall gas distribution. How one manages worsening hypoxemia and lung compliance is key to your skill as an operator of a mechanical ventilator.

Early in the course one tends to maintain driving pressure and inspiratory time in PAC while increasing PEEP. However, ultimately one runs into the 30cmH2O barrier. At that point one must adjust. An important adjustment is to stop the patient from breathing – or more likely – gasping. “Gasping” is a term that I will use in these tutorials to describe the patient generating massive transpulmonary pressures (and likely lung stretch) with minimal impact on ventilation. In fact, the increased work of breathing causes a deterioration in oxygenation due to lower mixed venous oxygen tensions consequent of increased oxygen consumption (not covered in this tutorial).

The second adjustment one must make is to increase the inspiratory time and reduce the PEEP – keeping in mind your tidal volume target. At this point respiratory rate must fall and Auto-PEEP controlled. The final part of the tutorial covers the major drawback of PAC ventilation – expiratory dys-synchrony: what happens when the patient wants to exhale during inspiration.

I guarantee you’ll learn something. @ccmturorials http://www.ccmtutorials.org

Pressure Assist Control (Part 1)

Posted on by
Reply

Virtually all “modern” modes of mechanical ventilation are built on a pressure controlled platform – the original of the species is Pressure Assist Control (PAC). This tutorial introduces PAC as it would be used on a patient admitted, for example, to ICU, with relatively normal lungs.
The tutorial commences with a clinical scenario followed by a guide to the settings on both Puritan Bennett and Drager ventilators. At this point in the course I am going to start spending more time on Drager devices as these ventilators were built from the ground up to be used as pressure controlled machines. There are nuances to the Drager ventilator that may be slightly counter-intuitive to clinicians who are familiar to other brands: in particular the use of a pressure limit (Pinsp) rather than a driving pressure above PEEP. I explain this with examples. I then explain how pressure control works and remind you of flow and time triggering.
All pressure controlled modes are time cycled with decelerating flow patterns. Care must be taken to ensure that inspiratory time is sufficiently long so as to ensure that the airway is adequately pressurized but not to long as will cause Auto-PEEP.
If you want to understand mechanical ventilation you absolutely must be able to interpret and craft ventilator waveforms – and this tutorial focuses on identifying abnormal waveforms in pressure control and correcting them. Hence there is a section on “Crafting the Pressure Waveform” and a section on “Crafting the Flow Waveform.”
Finally I discuss inspiratory time and tidal volumes

Positive End Expiratory Pressure – Phasic Shunting, Auto-PEEP & ARDS

Posted on by
Reply

In the previous tutorials I explained how hypoxemia results from low lung volumes, resulting in low functional residual capacity, airway closure and atelectasis. We looked at the mechanisms by which CPAP reduces the work of breathing in obstructed airways and how, following lung recruitment, PEEP maintains FRC.

In this tutorial I elaborate on these themes. I look at the problem of phasic V/Q mismatch (shunt) during expiration and how it may cause dis-correlation between pulse oximeters and blood gasses. PEEP prevents this at the expense of increasing dead space and negatively impacting ventilation. Optimal PEEP should restore lung compliance – compliance is low with low and high lung volumes. Compliance may also appear poor in pressure control when there is clinically significant auto-PEEP: the ventilator cannot distinguish auto-PEEP from driving pressure and lower than expected tidal volumes may result.

I explain the concept of the “Waterfall” effect to overcome Auto-PEEP. Finally, in our first visit to ARDS, I introduce the problem of deciding on optimal PEEP in that setting. I guarantee that you will learn something. @ccmtutorials http://www.ccmtutorials.org

@ccmtutorials

Why We Use CPAP and PEEP (part 1)

Posted on by
Reply

For most of us, the terms CPAP (continuous positive airway pressure) and PEEP (positive end expiratory pressure) have existed for all of our careers. But this was not always the case. Although mechanical ventilation, including the positive pressure variant, was a child of the 1950s – PEEP was not described until the late 1960s and even then was seen as a therapy for postoperative atelectasis in cardiac surgery patients. PEEP subsequently became the mainstay of therapy for hypoxic respiratory failure, but was always used in associated with positive pressure breaths. CPAP was developed in the early 1980s as a therapy for sleep disordered breathing. Over two decades the non invasive CPAP therapy and the invasive ventilation (pressure targeted breaths with PEEP) coalesced such that CPAP became a therapy for hypoxic respiratory failure and congestive heart failure, and pressure support (BiPAP or NIV) became a therapy for sleep apnea.

Strictly speaking PEEP and CPAP are different. It is possible to apply PEEP at end expiration and then commence the next breath from atmospheric pressure (try slapping your hand over your mouth mid expiration – then remove it and take a breath) – spontaneous PEEP. However this is almost never used in clinical practice. In CPAP the patients sinusoidal respiratory pattern persists – but starts and ends at an elevated baseline pressure. In PEEP the positive pressure breath starts and ends at that pressure (i.e. pre inspiration and end expiration). So, these days, in most scenarios PEEP and CPAP are indistinguishable. How they are delivered is, of course, different. Nevertheless they serve the same functions 1. To overcome airway resistance that causes disrupted or obstructed gas flow in expiration; 2. To reduce the work of breathing by reducing the magnitude of negative pleural pressure required to generate a tidal volume; 3. Most importantly – to restore functional residual capacity (FRC); 3. To prevent derecruitment of vulnerable lung units in the posterior dorsal segments of the lungs.

PEEP does not easily re-expand collapsed lung tissue – this is usually achieved by applying a recruitment maneuver (30cmH2O or more for 10 seconds during anesthesia, for 30 seconds in lung injury). The application of PEEP then prevents derecruitment. As such the majority of lung tissue may be re-expanded during anesthesia. This may not be the case in diseased lungs – the principle is to restore a functional residual capacity even if that effectively utilizes the inspiratory reserve volume.  

@ccmtutorials