Tag Archives: inverse ratio ventilation

Pressure Controlled Ventilation – Fundamentals Part 2: Mean Airway Pressure

Posted on by
Reply

In the previous tutorial I introduced some of the fundamental elements of pressure control ventilation – time cycling, decelerating flow, pressure ramps etc. This time I discuss, in detail, the concept of mean airway pressure (Pmaw) and describe why increasing Pmaw is an effective way of treating patients with extensive lung disease. In volume controlled ventilation this can be achieved by titrating PEEP upwards and increasing respiratory rate. Care must be taken to keep the plateau pressure below 30cmH2O in the majority of patients. In pressure control Pmaw is generally increased by increasing inspiratory time – extreme care must be taken, though, to avoid escalating Auto-PEEP as this corrodes tidal volume and actually reduces Pmaw.

If auto-PEEP is unavoidable, as it is with inverse ratio ventilation, then extrinsic PEEP should be reduced to ensure that tidal ventilation is maintained. Pmaw can be achieved in volume control by adding an inspiratory pause, and in pressure control by increasing respiratory rate – but these are less effective approaches – in volume control because of necessary flow limitation and in pressure control because of fixed inspiratory times, and Auto-PEEP.
I guarantee you’ll learn something.

@ccmtutorials

Pressure Controlled Ventilation – The Fundamentals Part 1

Posted on by
Reply

It is time to discuss Pressure Controlled Ventilation. In general if a patient has normal lungs or minimal disease, it really does not matter what mode of ventilation you use, pressure or volume controlled. However, there are some major advantages to using Pressure Control – principally in Acute Hypoxic Respiratory Failure. There are also many disadvantages. This is the first of two tutorials that cover the fundamentals of Pressure Control. I start with a discussion of the terminology that I will be using – the Pressure Limit (PL), the Inspiratory Pressure (IP), the Driving Pressure (DP)/Inspiratory Ramp, the Inspiratory Time (Ti) and the Expiratory Time (Texp). Pressure Controlled Ventilation (PCV) is pressure targeted/limited and volume variable. Breaths are time cycled – in inspiration, expiration or both. The flow pattern is always decelerating.

Following the introduction of a clinical scenario – a patient who is developing ARDS, I describe the process of PCV. I explain that tidal volumes are variable in all settings and all modes of PCV and later describe how changing patient position, chest wall elastance and airway resistance can all impact the tidal volume. I discuss why pressure control is the best option for mechanically ventilating children (particularly where there is no endotracheal tube cuff and a significant air leak) and why you need to pay attention to the rise time and respiratory rate. Finally I discuss the major disadvantages of using PCV. I guarantee you’ll learn something!
@ccmtutorials