To round out the year, here are three tutorials on the blood gas machine, blood gas analysis and the blood gas printout.
The first tutorial looks at how oxygen is measured using the Clark Electrode on the blood gas analyser and demonstrates the importance of co-oximetry in modern blood analysis. From that the fractional saturation of hemoglobin with oxygen is derived.
The second tutorial explains the Glass Electrode that measures pH and PCO2. Subsequently I cover problems you might encounter with blood gas sampling. If you don’t want to watch the technical stuff, I strongly recommend you scroll to the middle of the tutorial (12 minutes in) as it covers information that all healthcare practitioners must know.
The final tutorial looks at all of that other data that appears on blood gas printouts that you may never have understood – and it can be really confusing – DERIVED or calculated variables (bicarbonate, temperature correction, TCO2, O2 content, Base Excess, Standard Bicarbonate, Anion Gap etc.). I cover both the Radiometer ABL machines and the GEM 5000. I guarantee you’ll learn something.
Here are three tutorials on inspiratory and expiratory CO2 gas analysis. Tutorial 1 looks at Capnometry and the process behind measuring CO2 in exhaled gas. I cover mainstream CO2 analysis and explain why the end tidal CO2 (EtCO2) may be high or low. Tutorial 2 addresses the Capnograph, the trace and anomalies of the Capnograph at the time of intubation. I also explain Sidestream and Microstream CO2 and gas analysis. The final tutorial will be very helpful to anesthesiologists, particularly those taking exams: I go through a series of abnormal Capnographs, explaining why they are abnormal. I guarantee that you will learn something.
As part of my fundamentals of Anesthesiology and Critical Care Series I have posted 3 tutorials on the Role of CO2 /HCO3 in Acid Base Balance. These are entirely new tutorials (not part of the previous acid base series – that I have not finished yet! There is some overlap and updated facts and figures) and I have put a lot of work into getting the message of why the respiratory system is so important in acid base. Tutorial 1 is the basics of acid base. Tutorial 2 discusses respiratory acidosis, acute and chronic, and respiratory alkalosis. Tutorial 3 discusses respiratory compensation for acute metabolic acidosis. Although I cover the respiratory component in great depth, I also explain what metabolic acidosis is, what causes it and briefly discuss the anion gap, expected bicarbonate, base deficit and base deficit gap. I guarantee that you will learn something.
Here are the first 9 Tutorials in the Series – the majority are useful for Anesthesiologists and Intensive Care practitioners. Every tutorial contains something that you may not have previously known: I guarantee, who ever you are, that you’ll learn something.
One of the most intimidating things about entering the ICU for the first time is the “life support machine” – the mechanical ventilator. Although I have posted an extensive series of tutorials on Mechanical Ventilation, covering most of the modes, oxygen therapy and applied respiratory physiology, I have attempted, in this tutorial, to distill everything to the “least you have to know” in 40 minutes. Keep in mind that modern machines look more like iPhones, and are far easier to use than the devices I grew up with that looked to me, on day 1, like something in the cartoon below.
I start with a discussion about the difference between normal breathing, CPAP and Positive Pressure Ventilation (PPV). PEEP is, effectively, CPAP during PPV. I then go on to discuss pressure limited modes of ventilation; worldwide this are the most widely used modes in ICU. I limit my discussion to Pressure Assist Control, Volume Guaranteed Pressure Control (VG_PC) and Pressure Support Ventilation (PSV). VG-PC is a popular and flexible option as an ICU’s default mode. However, as it is a pressure controlled mode, there is significant variability in tidal volume and airway pressure from minute to minute.
Several important rules are emphasized: the tidal volume should, in general be lower than 6ml/kg of ideal body weight, the plateau pressure lower than 30cmH2O and the driving pressure lower than 15cmH2O. I introduce the Spontaneous Breathing Index (SBI = RR/TV in L). The magic number is 100. We use the SBI to determine the success of weaning on PSV.
Volume Controlled Ventilation is the predominant mode use in the Operating Rooms (Theatres), and Volume Assist Control is a popular mode in North America. In ICU you must set a peak inspiratory flow and be aware that this may be insufficient during assisted breaths and lead to dys-synchrony. Volume Control is often used in ARDS to “lock in” the Tidal Volume (TV) but the operator must be aware that the TV that matters is not what is dialed up on the ventilator, but what the patient exhales.
I go on to discuss how to assess the patient on invasive mechanical ventilation, by looking at whether they are breathing spontaneously, in which case we determine whether they are suitable for a Pressure Support wean or not, or whether or not there is a problem with oxygenation (increase FiO2, PEEP, Mean Airway Pressure and seriously consider Prone Positioning) or Ventilation (increase Respiratory Rate, Tidal Volume or both, reduce PEEP).
The final part of the tutorial looks at Non Invasive Ventilation (NIV), and I explain how, in general we only use 2 modes on standalone devices – CPAP and Spontaneous Timed (S/T). The latter is similar to PSV with a backup rate, but I point out that instead of PEEP+PS the breath is EPAP + IPAP and IPAP is not built upon IPAP, as is the case with PSV. If one is delivering NIV on an ICU ventilator, then “leak” adjustment or “leak sync” should be used.
This tutorial looks at the assessment of PaCO2 on the blood gas and how it interfaces with the pH and the Bicarbonate (HCO3-). The control of PaCO2 is a major physiological mechanism for maintaining homeostasis. CO2 production by the body must be balanced by CO2 elimination. PaCO2 rises when there is hypoventilation, this results in a fall in pH and an rise in HCO3 and this is called “Acute Respiratory Acidosis.” If the patient hyperventilates, the PaCO2 and the HCO3 fall and the pH rises: this is “Acute Respiratory Alkalosis.” When there is chronic CO2 retention, the body adapts by wasting Chloride in the urine, the pH normalizes and the HCO3 rises substantially.
Any patient who is intubated, or who has a laryngeal mask in situ, must undergo end tidal (end of exhalation) CO2 monitoring. The capnography waveform is worth evaluating, particularly if airway obstruction or increased resistance is suspected.
Included in this tutorial are various rules of thumb that you can use to determine the Respiratory Acid Base Status of the Patient – including the “Rule of 40.”
Hyperchloremic Acidosis is a common problem. It is usually an iatrogenic problem. Unfortunately, the majority of doctors who cause a patient to have Hyperchloremic Acidosis (HCA) are either unaware of the problem or ambivalent to it. For the most part, HCA is caused by the intravenous administration of isotonic saline solution (NS – “normal saline – NaCl 0.9%). This problem has been known about for more than 100 years and led Alexis Hartmann, a pediatrician from St Louis, to construct a balanced intravenous fluids, that he called “Lactated Ringers” solution. Ironically, in clinical practice, HCA is induced as part of the local hospital “protocol” for management of Diabetic Ketoacidosis. Inevitably, as the ketones fall, the Chloride rises, and the acidosis persists.
HCA is the only cause of “normal” anion gap metabolic acidosis and is almost always caused, . In the tutorial I explain that HCA is caused by a reduction in the Na-Cl strong ion difference (SID). The acidosis associated with NaCl 0.9% is more complex that merely a rise in plasma Chloride. Other serum electrolytes, Albumin and Hemoglobin are diluted – and this has an alkalinizing effect. Other resuscitation fluids have different impacts on acid base. Hyperchloremia is also a feature of Renal Tubular Acidosis (RTA), various other nephropathies, the administration of acetazolamide and other drugs, and following surgical transplantation of the ureters into the small bowel, If renal function is normal, and the Chloride level is lower than 125mmol/L, then the patient’s kidneys will resolve the problem over 36 to 48 hours. If the Chloride is very high, acidosis will persist, particularly in patients with poor renal function, and Sodium Bicarbonate infusions may be warranted.
Traditionally rules of thumb regarding the changes in PaCO2 and Bicarbonate in acid base balance have utilized mmHg. Unfortunately, in large tracts of the world, particularly in Europe, blood gases are reported in the SI unit kPa. This tutorial is for those people. I cover various acid base abnormalities – pH vs PaCO2, acute and chronic respiratory acidosis, respiratory alkalosis, metabolic acidosis and alkalosis and go through the various acid base rules of thumb using kPa, with examples. I guarantee you’ll learn something.
Rules:
Rule 1 H+ vs pH: a 1nmol/L increase in [H+} results in a 0.01 fall in pH
Rule 2 PaCO2 in Apnea: In apnea the PaCO2 rises by 1.5kPa in the first minute and by 0.5kPa per minute thereafter (this reduces progressively over time to 0.2-3kPa)
Rule 3 PaCO2 vs pH: For every 1kPa increase in the PaCO2 the pH falls by 0.06
Rule 4 PaCO2 vs HCO3 in Acute Respiratory Failure: For every 1kPa increase in the PaCO2, the HCO3 rises by 1mmol/L
Rule 5 PaCO2 vs HCO3 in Chronic Respiratory Failure: For every 1kPa increase in the PaCO2, the HCO3 rises by 3mmol/L and the Chloride falls by an equal value.
Rule 6 PaCO2 vs HCO3 in Acute Respiratory Alkalosis: For every 1kPa increase in the PaCO2, the HCO3 falls by 2mmol/L
Rule 7 PaCO2 versus Base Deficit in Acute Metabolic Acidosis: For every 1mmol/L increase in the Base Deficit (-BE e.g. from -1 to -2), the PaCO2 falls by 0.13kPa e.g. if the BD is -10 the PaCO2 will fall by 1.3kPa from 5.3 to 4
Rule 8 PaCO2 vs HCO3 in Chronic Metabolic Alkalosis (in ICU): For every 1mmol/L increase in the Base Excess (or HCO3) the PaCO2 increase by 0.13kPa e.g. if the BE is +10 then the PaCO2 will increase from 5.3 to 6.6