Metabolic Acidosis – What it is, Diagnosis and Tools

This is Tutorial 4 in the Acid Base Series – on the topic of Metabolic Acidosis. The tutorial is based on a single blood gas – a random sample that was handed to me in the ICU recently. Blood Gas Used in This Tutorial: pH 7.19 PaCO2 32mmHg (4.1kPa) HCO3- 13.1 BE – 16.5 AG 20 Na+ 126 K+ 3.1 Cl- 96 Lactate- 7.2 Ketones- 0.6mmol/L Albumin 21g/L Creatinine 3.3mg/dl (293mmol/l)

Metabolic Acidosis is characterized by an increase in the relative ratio of strong anions to strong cations in the plasma. The PaCO2 and the Bicarbonate fall in a predictable manner. It is possible to compute the effectiveness of respiratory compensation for metabolic acidosis by using the Winters equation.

To understand the mechanism of metabolic acidosis – caused by accumulation of mineral (Chloride) and organic (Lactate, Ketones, Metabolic Junk Products) anions – one needs to apply the law of Electrical Neutrality. All of the positive charges must equal all of the negative charges. As Bicarbonate is consumed in the process of buffering metabolic acidosis, the change in the Bicarbonate level (downwards) can be used to quantify the degree of acidosis. This is important because the pH may be within the normal range due to respiratory compensation. Be aware that the HCO3- quantum that is displayed on a blood gas is derived from the pH and PCO2 by the Henderson Hasselbalch equation.

Unfortunately, because respiratory abnormalities may complicate the diagnosis of metabolic acidosis, and pH and PCO2 are altered by changes in temperature, the precision of a single reading of PCO2 and HCO3- may be poor. Consequently, the Standard Base Excess was developed to excise the respiratory component from the change in bicarbonate. Again it is a derived variable and may be imprecise. Nevertheless, BE (or 1-BE the Base Deficit BD) is a terrific scanning tool to identify the presence of a metabolic acidosis (BD) or alkalosis (BE). It is defined as the amount of strong cation (BD) or strong anion (BE) required to bring the pH back to 7.4 when the temperature is 37 degrees Celcius and the the PaCO2 is 40mmHg or 5.3kPa.

The Base Deficit does not indicate the source of the acidosis, but it can be recalculated to remove the impact of the [Na+], the [Cl-], the body water and the serum Albumin (and the Lactate) to determine the Base Deficit Gap – indicative of the quantity of Unmeasured Anions (UMA, Ketones, if not measured, and Renal Acids (metabolic junk products – MJP).

Traditionally clinicians use the Anion Gap to determine whether a patient has a Hyperchloremic Acidosis (no gap) from a UMA acidosis. I find this quite a dated concept. If the [Cl-] exceeds 105 and the plasma Sodium is normal, the patient has a Hypercloremic acidosis. We can easily measure Ketones and Lactate. The AG is imprecise and should be adjusted for the Albumin level, which tends to hover around 25g per liter in critically ill patients (narrowing the Gap and alkalinizing the patient). I do think if you are calculating the AG that you must include the K+ on the Cation side, the Lactate on the Anion side and adjust the Albumin.

The Strong Ion Gap is a more advanced, more precise and more cumbersome version of the AG. Regardless of the approach, one eventually ends up with a quantify of unidentifiable anions (SIG) that may be of medley origin (metabolism, poisoning etc). It is my opinion that it is useful to tease out all of the different acidifying and alkalinizing processes (the Fencl approach) to determine what is going on with the patient. All of these calculations can be done in seconds with smartphone apps and spreadsheets.

I guarantee you will learn something. @ccmtutorials http://www.ccm-tutorials.com

Ions & The pKa – Local Anesthetics, Opioids and Midazolam

You may think that this whole ionization and pKa stuff is of little relevance to you as a clinician working in ED, Anesthesiology or ICU, but you are mistaken. The pH of blood (whether or not the [H+] exceeds the [OH-] has major impact on the pharmacokinetics of certain drugs. Moreover, some drugs rely on a differential between extracellular and intracellular pH to be effective.

This tutorial looks at the pharmacology of three types of drugs impacted by pH. These drugs are local anesthetics, opioids and the benzodiazepine – midazolam. All of these agents are weak bases whose degree of ionization varies with pH.

  1. Speed of onset is related to the pKa – the lower the pKa of weak bases the more rapid the onset of action
  2. Duration of action is related to protein binding – particularly albumin (there are other proteins). Albumin depletion is common in critical illness, leading to higher bioavailability and shorter duration of action.
  3. Potency is related to lipid solubility. Fentanyl is highly potent because of this.

This tutorial is supplementary to the acid base course. The material is ESSENTIAL for trainees and practitioners in Anesthesiology and Dentistry. @ccmtutorials http://www.ccmtutorials.org

The Ripple of Ions – Ionization and the pKa

To truly understand acid base chemistry, it is imperative that you have a grasp of ionization theory. Although this might appear a little nerdy, it is quite straightforward and will also provide you with a basis for understanding the basic pharmacology of local anesthetics and opioids. Particles that disintegrate into component parts that carry charge are known as ions. If that charge is positive they are cations and if it is negative they are anions. Measurement of charge is known as valency, Most electrolytes in the body are univalent – Na, Cl, K, HCO3 – and their valency is quantifiably identical to their molarity (i.e. 140 mmol/L of Na+ = 1mEq/L). Some, however, are divalent – Calcium and Magnesium and Phosphorous. Ionized particles are a major component of acid base chemistry. They may be derived from mineral salts – Na, Cl, K, PO4, Mg, Ca or organic molecules – Lactate, Ketones, Metabolic Junk Products – manufactured in the body. Weak anionic acids are also manufactured – Bicarbonate and Albumin.

The relative quantities of different particles is governed by MASS CONSERVATION. Regardless of the source and quantity of anions and cations ELECTRICAL NEUTRALITY must always hold. Where there is imbalance between anions and cations the electrochemical void is filled by hydrogen or hydroxyl (derived from water dissociation) and acid base abnormalities ensue.

What makes ionized particles “strong” or “weak” acids or bases is determined by the pKa – the Ion Dissociation constant. This is the pH at which the particle is 50% dissociated or associated. As all electrochemical activity in the body occurs withing the physiological range of pH – 6.8 to about 7.65 – whether a ionic particle’s pKa is below or above, essentially 7.4, determines whether it is an acid or a base. For example – Lactic Acid has a pKa of 3.1 – at that point is is 50% associated (LA-H) and 50% dissociated (La-). At the environmental pH falls, for example towards 1, for example in the stomach, the chemical associates more (Lactic Acid). As the pH rises towards 7.4 it dissociates more (Lactate). At all physiologic ranges of pH Lactate is fully dissociated. Likewise, chemicals that have a pKa above the physiologic range pH (i.e greater than 7.6) are bases – and they become more associated at higher pH ranges. Sodium Hydroxide has a pKa of greater than12, which means that at pH 12 it is 50% associated, at pH 15 it is close to 100% associated. At physiologic range pH it is fully dissociated. Particles that are fully dissociated at all physiologic ranges of pH – cations such as Na+, K+, Mg2+ and Ca2+ and anions such as Cl-, Lactate- and Beta-Hydroxybutyrate, are known as STRONG IONS – they never bind to other ions (to create salts), hydroxyl or hydrogen in the body. Particles that are partially dissociated, whose pKa is closer to 7.4 – Bicarbonate, Albumin, Phosphate, Hemoglobin, are WEAK ACIDS and as they pick up more hydrogen ions at lower pH levels, they act as buffers.

Metabolic acid base balance is governed by the relative charge distribution (mEq/L) of STRONG IONS – known as the STRONG ION DIFFERENCE (SID) and the availability of weak acid buffers (ATOT). If the SID reduces, there is excess anion and metabolic acidosis. If the SID increases, there is excess cation or deficient anion and metabolic alkalosis.

I guarantee you’ll learn something. @ccmtutorials http://www.ccmtutorials.org

RESPIRATORY ACID BASE DISORDERS

This is Tutorial 2 in the Series on Acid Base: The FIzz of CO2.

Carbon Dioxide is a gas that is produced by the mitochodria and passes through the cell membrane into the extracellular fluid and blood. There it dissolves, attaches to hemoglobin or, under the influence of carbonic anhydrase, hydrates with water to generate carbonic acid – which rapidly dissociates to release hydrogen (bound to hemoglobin) and bicarbonate. Carbon Dioxide obeys Dalton’s law and Henry’s law. The latter determines that the PCO2 is directly proportionate to the CO2 content. Carbon Dioxide becomes more soluble in the blood as temperature falls. Hence measuring gaseous CO2 requires the blood gas machine to be set at 37 degrees.

The body produces, at rest, 200ml per minute of CO2. The body excretes 200ml per minute of CO2. As metabolism increases, respiratory excretion of CO2 increases. This results in a PaCO2 of 40mmHg or 5.1kPa. There is a 3-4mmHg or 0.5kPa difference between the PaCO2 and the etCO2. Because the body exists, usually, is steady state, the etCO2 can be used to estimate the PaCO2 (most of the time). In apnea, the PaCO2 rises rapidly – it doubles in 8 minutes.

When PaCO2 rises, [HCO3-] rises also – and in a very predictable way. So, when a patient develops acute respiratory failure, or underventilates (for example under anesthesia), pH falls, predictably, the PaCO2 rises, predictably and the Bicarbonate rises, predictably. This is acute respiratory acidosis – and in this tutorial I will explain how and why this occurs.

It is imperative to understand that CO2 and [HCO3-] are different versions of the same thing in the body and the rise in bicarbonate in respiratory disorders is not some form of “compensation” it is physiology. Indeed in chronic respiratory failure, the increase in respiratory acids (Chronic respiratory acidosis) is counterbalanced by a fall in the plasma Chloride levels. Acute respiratory alkalosis is associated with pain, anxiety, agitation or over ventilation and is associated with a modest fall in Bicarbonate.

@ccmtutorials http://www.ccmtutorials.com

ACID BASE 1 – The Power of HYDROGEN

This is the first tutorial in a new series on acid base balance. This is not a beginners course – although I will attempt to cover everything the bedside clinician should know, particularly in the ICU. I have been teaching and writing about acid base for more than 25 years and I find it disappointing how many clinicians fail to understand even the basics of physical chemistry that underpin this topic.

This course is built on the foundation of physical and electrochemistry (all acid base reactions occur in water, all ionizing processes must be accounted for electrical neutrality must always hold.

The first tutorial is titled “The Power of Hydrogen” and it looks at the chemistry of water, the tendency for water to dissociate into moieties that display hydrogen ions and hydroxyl ions, and how temperature impacts that dissociation equilibrium. It is imperative that you understand that there are effectively no free protons (hydrogen ions) in the extracellular fluid. When we measure [H+] or its corollary, pH, we are measuring hydrogen ion ACTIVITY not hydrogen ion concentration. I explain the origin of pH and how pH varies with temperature despite the aqueous solution remaining chemically neutral. I explain the history of acid base, starting with O’Shaughnessy and then moving on to Arrhenius and Bronsted and Lowry. It is easier to understand acid base if one utilizes the Arrhenius theory, but the concepts are fully consistent with the BL approach, because water is amphiprotic (it can act as a “proton donor” or “proton acceptor.”

I explain how blood gas machines measure pH and why pH (and PCO2) should almost always be measured at 37 degrees Celsius. At the end of the tutorial I explain the terms acidosis and alkalosis, respiratory and metabolic. @ccmtutorials http://www.ccmtutorials.org